BrochuresFeatures
Overview
The HOBO Pendant Event data logger is ideal for rainfall logging and connects to most standard tipping-bucket rain gauges to determine rainfall rates, times, and duration. The event data is only stored when it happens for better memory usage.
Technical
External event input
Event sensor Two-wire interface suitable for measuring mechanical and electrical contact closures
Maximum input frequency 1 Hz (1 pulse per second)
Lockout time 500 ms
Minimum pulse width 1 ms (hardware debounce)
Input/output impedance 100 kΩ
Edge detection Falling edge, contact closure, or Schmitt-trigger buffer
Preferred switch type Normally open.
Open circuit input voltage Battery voltage; nominally 3.0 V
Maximum input voltage Battery voltage + 0.3 V
User connection 24 AWG, 2 leads, white (+), black (-)
Temperature measurement
Measurement range -20° to 70°C (-4° to 158°F)
Accuracy ± 0.53°C from 0° to 50°C
Resolution 0.14°C at 25°C (0.25°F at 77°F), see Plot A
Drift Less than 0.1°C/year (0.2°F/year)
Response time Airflow of 2 m/s (4.4 mph), 10 minutes, typical to 90%
Logger
Time accuracy ± 1 minute per month at 25°C (77°F), see Plot B
Operating range -20° to 70°C (-4° to 158°F)
Environmental rating Tested to NEMA 6 and IP67; suitable for deployment outdoors
Drop specification 1.5 m (5 ft) onto concrete
NIST traceable certification Available for temperature only at additional charge; temperature range -20° to 70°C (-4° to 158°F)
Battery CR-2032 3V lithium battery; 1 year typical use
Memory 64K bytes
Materials Polypropylene case; stainless steel screws; Buna-N o-ring; PVC cable insulation
Weight 50 g (1.7 oz.)
Dimensions 71 x 33 x 23 mm (2.8 x 1.3 x 0.9 inches); 1.8 m (6 ft) cable
Documents
Hobo Pendant Event Logger