The U1000 is an ultrasonic permanent/fixed clamp-on flow metering solution for measuring flow rate – with a volume pulse output and optional 4-20mA flow rate signal, which can be used as a stand alone meter or as an integral part of an aM&T or BEM’s system. Simple to install – clamp-on to the pipe, connect power and enter the pipe diameter, no specialist skills or tools required! A cost effective alternative to traditional in-line meter installation, plus dry servicing, providing minimum downtime and maximum availability! Compact, rugged and reliable, the U1000 has been designed to provide sustained performance in industrial environments. The Ultraflo is a transit time ultrasonic flow meter designed to work with clampon transducers, providing an accurate
Features
Overview
measurement of liquid flowing within a closed pipe, without the need for any mechanical parts to be inserted through
the pipe wall or to protrude into the flow system. It takes just a few minutes to install and there is no need to shut down
flow or drain the system! When ultrasound is transmitted between the transducers, the speed at which the sound travels through the liquid is accelerated slightly by the velocity of the liquid through the pipe. When ultrasound is transmitted in the opposite direction, the flow of the liquid causes the transmitted sound to decelerate. The subsequent time difference is directly proportional to the flow velocity in the pipe. Having measured the flow velocity and knowing the pipe cross-sectional area, the volumetric flow can be easily calculated.Technical
Accuracy +/-1-3% of flow reading for >0.3m/s
Flow Velocity Range 0.1 to 10m/s
Pipe Range 25mm OD - 115mm OD
Water Temp Range 0°C to 85°C
Flow Rate Output Optional 4-20mA
Volume Output Pulse or Frequency
External Power Supply 12V-24V +/- 10% AC/DC at 7 watts
Electronics Enclosure IP54
Input/Output Cable 5m x 6 core for power in and data out
Documents