The AP-700 offers all of the basic water monitoring parameters widely used today. It features a combined pH/ORP sensor that’s field replaceable, a rugged 4-ring EC sensor that’s found on all of our Aquaprobes, a newly designed long life galvanic DO sensor that has replaceable membrane caps and an industrial temperature sensor. Both the DO and EC sensors are factory replaceable on these units meaning that all sensors can be replaced. The AP-800 comes with all the benefits mentioned above, but this probe has our optical turbidity sensor installed. The sensor is a nephelometric turbidity sensor that conforms to ISO 7027. The design utilizes dense sapphire lenses for the best life and the best optical response. This sensor is also factory replaceable should the probe receive any damage in the field. These packages are designed to give you everything you need to get out there and start monitoring.
Features
Overview
The AP-700 and the AP-800 Aquaprobes are available as part of a set water monitoring package. These packages provide a complete entry level multiparamater water monitoring set that's easy to use, portable and cost effective. The probes are constructed from the same field proven materials as the AP-2000, AP-5000 and AP-7000 Aquaprobes. The marine grade aluminium is very tough and suitable for deployment in both fresh and marine applications. Each probe comes with a 3m cable attached to the probe that features a rugged AquaConn connector. Cables are factory replaceable should any accidents happen in the field.
Technical
Dissolved Oxygen (Galvanic) Range 0 – 500.0% / 0 – 50.00 mg/L
Resolution 0.1% / 0.01mg/L
Accuracy 0 - 200%: ± 1% of reading. 200% - 500%: ± 10%
Conductivity (EC) Range 0 – 200 mS/cm (0 - 200,000 µS/cm)
Resolution 3 Auto-range scales: 0 – 9999 µS/cm, 10.00 – 99.99 mS/cm, 100.0 – 200.0mS/cm
Accuracy ± 1% of reading or ± 1µS/cm if greater
TDS* Range 0 – 100,000 mg/L (ppm)
Resolution 2 Auto-range scales: 0 – 9999mg/L, 10.00 – 100.00g/L
Accuracy ± 1% of reading or ± 1mg/L if greater
Resistivity* Range 5 Ωcm – 1 MΩcm
Resolution 2 Auto-range scales: 5 – 9999 Ωcm, 10.0 – 1000.0 KΩcm
Accuracy ± 1% of reading or ± 1 Ωcm if greater
Salinity* Range 0 – 70 PSU / 0 – 70.00 ppt (g/Kg)
Resolution 0.01 PSU / 0.01 ppt
Accuracy ± 1% of reading or ± 0.1 unit if greater
Seawater Specific Gravity* Range 0 – 50 st
Resolution 0.1 st
Accuracy ± 1.0 st
pH Range 0 – 14 pH / ± 625mV
Resolution 0.01 pH / ± 0.1mV
Accuracy ± 0.01 pH / ± 5mV
ORP Range ± 2000mV
Resolution 0.1mV
Accuracy ± 5mV
Temperature Range -5°C – +50°C (23°F – 122°F)
Resolution 0.1° C/F
Accuracy ± 0.5° C
Turbidity Range 0 – 3000 NTU
Resolution 2 Auto-range scales: 0.0 99.9 NTU, 100 – 3000 NTU
Repeatability ± 2% of reading
*Only available on the AP-800 Aquaprobe
Documents